home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19950726-19950929
/
000085_news@columbia.edu_Thu Aug 3 13:08:56 1995.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA13717
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sat, 5 Aug 1995 04:25:18 -0400
Received: by apakabar.cc.columbia.edu id AA15136
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sat, 5 Aug 1995 04:25:17 -0400
Path: news.columbia.edu!news.cs.columbia.edu!news.boxhill.com!news.sprintlink.net!simtel!col.hp.com!news.dtc.hp.com!hpscit.sc.hp.com!hpuerci.atl.hp.com!hpuerci.atl.hp.com!johnp
From: johnp@hpuerci.atl.hp.com (John Pezzano)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: Problem with echo after connecting to modem
Date: 3 Aug 1995 13:08:56 GMT
Organization: Hewlett-Packard NARC Atlanta
Lines: 27
Distribution: world
Message-Id: <3vqhp8$16m@hpuerci.atl.hp.com>
References: <3vob7l$1ck@pegasus.rutgers.edu>
Nntp-Posting-Host: hpuerci.atl.hp.com
X-Newsreader: TIN [version 1.2 PL2]
Apparently-To: kermit.misc@watsun.cc.columbia.edu
Red Barchetta (paradox@pegasus.rutgers.edu) wrote:
: I've tried asking everyone around here who has used Kermit this question, and
: consulted two different manuals, and I still haven't been able to come up
: with an answer. Maybe someone here can help me out.
: The problem I'm having is that, after typing "connect" to make contact with
: my modem (a Hayes Accura 14400 external fax modem), I get a blank screen. The
: blue bar appears on the bottom, but the rest of the screen is blank. The
: cursor just sits in the upper left hand corner of the screen. If I type
: something, the send/receive lights flash on the modem, but the screen remains
: blank. I can issues commands to the modem (it will dial and even make contact
: with remote systems) but I cannot see them! Does anyone here know what the
: problem could be? This is the first time I have used any type of comm.
: software, but I followed the directions I was given. I am probably just
: missing something really stupid... Any help would be greatly appreciated.
Have you issued:
ATE0 - echo commands on
ATQ0 - enable result codes
ATV1 - Display results as words
Then issued AT&W to write that out to non-volatile memory?
--
johnP
John Pezzano, HP NAET
Email: johnp@hpuerca.atl.hp.com